Omni LED Par 64 UV PACK OF 6

  • Model: OS-LED-PAR64UV
  • Shipping Weight: 30lbs
  • Manufactured by: OmniSistem
  • In Stock
  • Category: Washlights, Pars, & Up-Lighting

$1074 for SALE price, add to cart

• Product Model: OS-LED-PAR64UV

• 100V-260V/60 Hz
• 13W
• 151 UV LEDs
• 10mm
• 0.2W
• 100,000 HRS
• Very Low Power Consumption
• Includes hanging bracket with base
• Dimmer
• Strobe
• DMX-512 (2 Channels)
• Stand Alone (Sound active, Auto)•
• 4 Lbs
• 12" x 8" x 10.5"
• 6 Lbs (Single Pack)
• 30 Lbs (Master Pack of 6)
• 9" x 9" x 13" (Single Pack)
• 28" x 19" x 15" (Master Pack of 6)

Maintenance Information
• Use a damp cloth to clean your fixture. Never use solvents or agressive detergents to clean your unit.
• Clean the lense every month to enhance vibrant colors.
• Do not modify your unit in any way. this will prolong the life of your effect.
• Make sure your unit is properly ventilated.
• Installing your unit in a debris free environment will keep your effects
• Any maintenance work should only be carried out by a qualified technician.
Safety Information
• this unit is intended for indoor use only. Use of the unit outdoors voids all warranties.
• Ensure the power source is of the correct voltage for this fixture. Connect power through a direct switch circuit, NOT a dimmer or variable circuit source.
• Disconnect unit from power when not in use.
• Do not install or operate the device in harmful environment conditions.
• (i.e. extreme heat, cold, moisture or dust)
• If the unit has been exposed to extreme environmental conditions or drastic temperature fluctuations, ensure the unit is returned to room temperature before operating.
• Do not block fan or ventilation slots while operating unit.
• Maximum Ambient Temperature is 113° F (45° C). Do not operate unit at temperatures higher than this.
• Do not move the device while in operation.
• Do not aim smoke or bubble effects near unit.
• Do not operate the unit during thunderstorms.
• Disconnect power prior to replacing fuse, servicing or cleaning unit.
• Do not use solvents or abrasive cleaners to clean the unit. Use a damp cloth only.
• Modification(s) to the device or power cord will result in termination of the dealer/manufacturer's warranty.
• Use safety cable for added security when installing the unit by the hanging bracket.
• Avoid direct eye contact with the light source.
• Do not connect this unit to a dimmer pack.
• Keep combustible materials away from the fixture.
• Do not spill liquids in to or on to your unit. If this ever happens, disconnect the main power immediately.
• The safest way to disconnect your power cord from main power is to grip cord end and detach from plug.
• Do not leave unit unattended while operating for extended periods of time or overnight.
• Always refer service to a qualified technician.
• Contact the nearest dealer or service center for assistance with operating your unit. Unauthorized tampering can cause additional damage. All units opened by an unauthorized user will not be covered under warranty.

Add to Cart:

This product was added to our catalog on Monday 12 March, 2012.

Copyright © 2018 stage and theater lighting.
Your IP Address is:
wastrong template